WELCOME TO BEEPTOOLKIT R&D AGGREGATOR

   Start working with BEEPTOOLKIT, as in the research and development department of an ambitious startup, using BEEPTOOLKIT DEMO CONFIGURATOR for modeling and BEEPTOOLKIT CONTROLLER for R&D and prototyping.
   They are easy to use and ready to brainstorm your ideas and first creative projects.
  These software packages are designed to start from scratch.

   For all products, you have at your disposal a simple and clear video consultation, our expert support and the work of the forum.
    Start from scratch, from an idea to a turnkey solution.

            GENERAL RECOMMENDATIONS for Mobile or desk top PC platforms (min):
OS Windows 10 Pro 32Bit or 64Bit; Tablet 8"-10" or PC, intel CPU  Quad-core, Display Resolution: 8" 10 Points
Touch Screen (10:16 1280x800 IPS), 4G RAM, ROM 64GB, Speaker Built-in 8 /0.8W x 1, USB(2,3) OTG,
Headphone 3.5mm., IR, 
Wi-Fi, Bluetooth at your discretion.
 

Getting started with BEEPTOOLKIT products
WELCOME TO BEEPTOOLKIT! BEFORE YOU WORK ALL OVER THE WORLD, YOU SHOULD INSTALL THE SOFTWARE,
REATE AND WRITE AN ALGORITHM FOR YOUR IDEA.

 

             BEEPTOOLKIT DEMO CONFIGURATOR software
allows ou to see your idea in work without connecting
external hardware components and the risk of a fatal
failure.
At the same time, you indicate the types of control or
acquisition signals, their duration, interruptions,

repeats and other important characteristics. Ultimately,

when you are completely satisfied with the result, you

save the configuration parameters (there may be a large
number of them) and you can proceed to the next stages
f development. 

 

             Watch the BEEPTOOLKIT DEMO CONFIGURATOR video tutorial. 
BEEPTOOLKIT DEMO CONFIGURATOR software allows you to configure and activate all ports of the output signals, including communication protocols with external equipment.

              Platform BEEPTOKLIT  this package allows
you to 
manage various power supplies, signal generators
and 
their parameters.
- BEEPTOKLIT  for control servo / stepper

and other motors. All you need for a successful project

is to correctly calculate the force of the mechanical

load on the motor shaft, as well as select the drivers

that correspond to the type of engine.
- BEEPTOKLIT  for UART. This group

combines the functions of UART receiving external

differential signals, their processing and integration.

Work with sensors (movement, RGB, tracking, XYZ position, light, CO2, temperature, humidity, liquid level, pressure, mass and etc.). UART control allows you to organize USB-control of various electronic components, devices and equipment in accordance with the manufacturers interface protocols.

- ASSEMBLE the circuits and equipment, plug in and run the BEEPTOOLKIT Platform. Recommendations
on the assembly, selection, configuration and connection of project equipment can be found in the REFERENCE or
an the relevant sections of the our FORUM. Watch the video tutorial Platform BEEPTOOLKIT.


          BEEPTEC ENGIEERING PROJECT - begins with the preparation of the NDA, then you send us the terms of reference, and we enter into negotiations with you. We will carefully study your requirements and make an offer for you. You decide to entrust us with the development of the project. For the time of the contractual relationship, a virtual office with limited access for your representatives and our specialists will be at your disposal. The contract form with all conditions can be found here. You control the implementation of the project throughout the term of the Agreement and at the end of its warranty service. Since the transfer of the project, you are a 100% owner of intellectual property and you can dispose of it at your discretion. Ours some finished projects are presented here in a video presentation to demonstrate the level of complexity and our positive experience.